Tags Posts tagged with "unroot"


by -
0 992

Root or Unroot Xiaomi Mi5

There are different ways in which you can Root or Unroot Xiaomi MI 5 smartphone. The first way is Rooting Xiaomi MI 5 with a PC, and the other way is Rooting Xiaomi MI 5 without a PC. In this segment, we are going to deal with Unrooting Xiaomi MI 5 without a PC. Rooting your Xiaomi MI 5 will allow you to enjoy some features and apps that can’t be allowed onto your Phone when rooted since your will be bypassing the privacy of the phone. Here is a basic guideline on how to root or unroot your Xiaomi MI 5 without a PC.

Xiaomi Mi 5

Root or Unroot Xiaomi

STEP 1: Pre-requisites.
For you to unroot your Xiaomi MI 5 smartphone without your PC, you need to have the following prerequisites. You need to ensure that your phone is charged and its 100% full. This is the only prerequisite that you need to have before you start working on it. This is done so as to prevent any interruptions that you might face when rooting your phone.

STEP 2: Enable the USB Debugging Mode.
The USB debugging mode is done under the Setting section. If you can’t find the USB debugging section on the setting platform, then you can access this by tapping the about phone section under the setting around 6-7 times so that the developer option to be enabled.

STEP 3: Enable the Unknown Source.
You will then navigate to the Unknown Source through the Security Setting option to get to it. When you reach there, you will enable the Unknown Source setting.

STEP 4: Download and Install the Kingroot App.
The Kingroot app is one of the essential apps required in the rooting of your Xiaomi MI 5. You will now download the app. After downloading the app, you will install the app on your Xiaomi MI5 mobile phone. The Kingroot App has got a small size and thus it will not consume a lot of your phone memory.

STEP 5: Launch and Run The Kingroot App.
After installing the Kingroot App, you will then run it. After it has opened, it will display a big circle where you will have to tap it and allow it to run so as to complete the whole process. After the process has been done a big white tick in the green circle will pop up. This is a clear indication that your Xiaomi MI 5 has been rooted entirely.

STEP 6: Reboot Your Xiaomi MI 5.
For you to complete the whole rooting process, you will have to reboot your Xiaomi MI 5 smartphone. After this, your phone will have been completely rooted.
Following the above simple procedures will enable you to root Xiaomi MI 5 within 30 minutes. The steps are basic and easy to follow. If this does not work then, it’s best if you consider rooting your Xiaomi MI 5 smartphone using the PC. The OC procedure are also simple though at times it becomes very complicated.

by -
0 3518

Root and Unroot Xiaomi Redmi Note 3

Lately Xiaomi has launched its recent innovation in the market, and it is none other than Redmi Note 3. Customers have already brought one for them, and are having a good time enjoying its amazing features. One of the best things about Redmi 3 is it has been loaded with various new features and comes along with MIUI ROM. If you have recently purchased the phone, then there are chances that you are looking for options of rooting your device. In order to help you easily carry out rooting of your device, we have brought a handy guide for you. However before following this guide, don’t forget that this guide is just for Redmi Note 3 users and it cannot be tried on other Xiaomi devices.

Xiaomi Redmi Note 3How to root and unroot Xiaomi Redmi Note 3

Root Redmi Note 3

Upon rooting your device, you will be able to install custom recovery and also rooted applications on the phone. To begin with rooting, keep following simple steps mentioned below however before you start make sure to take backup of your phone.

  • In the beginning, check the model number of your device to ensure that the guide is meant for you and if you can follow this for rooting your phone.
  • Download the root.zip file and save it on the desktop of your computer system. Don’t extract the folder and keep it as it is.
  • Use SD card of your note and get these files on your phone.
  • Open the updater app on the device, click menu and select the option “Select update package option.”
  • Once this is done select “root.zip” which was downloaded at step 1. Click update,
  • Once you select this, your phone would ask you to reboot. Select reboot.
  • Reboot the device now and go to security app -> Permissions -> Root permission -> Turn on. This will give you root access on your device.

Unroot Redmi Note 3

After following this step, you can probably enjoy the rooted device and use or access almost anything. Now, after rooting your device if you wish to unroot it again then simply follow the steps mentioned below;

  • Go to security app -> Permissions -> Root permission -> Turn it off
  • Now download the unroot.zip file
  • Connect the phone to your PC and simply move it to the SD card of your phone.
  • Open the updater app on note, and then click menu. Select update package option.
  • Unroot zip can then be selected which was downloaded at step 2.
  • Your device would ask for unroot and then it will be unrooted.

by -
0 5113

Rooting Asus Zenfone 2 ZE551ML via Method 1
The principal system is simple as well as takes less time and obliges you to perform less undertakings contrasted with the second technique. In the event that you take after this technique, then you can without much of a stretch Unroot your gadget to get OTA redesigns. Here is the means by which to do it.
Download and Install USB Drivers Required for your gadget to your PC from Here
Next, download Zip document containing interim CWM bundle and separate the envelope to any area on your PC

Asus Zenfone 2Root And Unroot Asus Zenfone 2 ZE551ML
  1. You need to empower USB Debugging on your Asus Zenfone 2 ZE551ML. To do this, go to Settings, tap on About , then tap in Software data and tap 7 times on Build Number. When you see the message “You are currently a designer” you can make certain that you have empowered Developer Option. Presently again tap on Settings > About > Developer Option and Enable USB Debugging
    Connect your mobile to PC utilizing the USB cord
  2.  Duplicate SuperSUxxx.zip to the root organizer of your SD card
    Next, run cai_dat_CWM.bat and in the order window, sort ACCEPT (capital letters) and hit enter.
  3. Next, sort in T4 and hit enter. Presently your gadget ought to restart in fast boot mode. Presently you need to take the orders and stack the interim CWM. Hold up till it stacks the documents totally.
  4. Next, when your gadget boots in CWM Recovery, you can detach the gadget from PC. Presently you need to choose Install Zip by utilizing the Volume Keys to move and select it utilizing the Power Key.
  5. Next, select pick Zip from outside SD card and select the SuperSUxxx.zip document that you have duplicated to your Root organizer. Presently hold up till SuperSU is being introduced on your gadget.

Once done, restart your telephone and you ought to have effectively established Asus Zenfone 2 ZE551ML ZE550ML/ZE551ML. In the event that you need to Unroot it, then go to SuperSU, tap on Setting and select Full Unroot.

Method 2:-
On the off chance that the first system didn’t work for you, you can continue with the second technique which is utilizing the pre-established ROM. Be that as it may, on the off chance that you utilize this strategy, then you can’t introduce OTA upgrade dissimilar to the first technique.Begin with downloading and introducing the USB drivers

  1. Download and introduce ADB (Skip on the off chance that you have as of now introduced )
  2. Download the pre-pull firmware records for ZE551ML it is Z00A and for ZE550ML it is Z008 in light of your model.
  3.  Download the Flash Tools Zip document and remove it
  4.  Open the pre-established firmware organizer and double tap on Z00x_WW_x.x.x.x_system_w_root.zip and separate it. Subsequent to extricating it you ought to see System.img document.
  5. Next, move System. img, droidboot.img, boot.img and recovery.img to the organizer whether you had separated Flash Tools.zip
  6. Put your Zenfone into Fast boot mode. To do this turn off your gadget and afterward press and hold the Volume Up and control key all the while till it vibrates.
  7. When you are in Fast boot mode, associate with PC utilizing USB link
  8.  Open the Flash Tools Folder. Hold down Shift and right snap inside the envelope and select Open charge window here
  9. In the summon window, enter the accompanying charge one by one. Do hold up till the every charge completes, before entering the new order.

Unroot Process
Download and introduce your SrsRoot on your PC.
Tick the “USB troubleshooting mode” and “Obscure starting points” boxes on your Asus Zenfone 2 ZE551ML

  1. Empowering your “USB troubleshooting mode” permits you to set a decent association between your PC and your telephone. The “obscure starting points” permits you to introduce different applications than Google Play on your gadget.
  2. For old Android version (1.0, 2.0, and so on) go to “Settings” – > “Applications” (Click on the “obscure Origins” and “Advancement” – > “USB investigating).
  3. For gadgets with later forms (4.0, 5.0, and so on.). Go to “Change” – > “Security” and “Settings Development settings” (Click here on “USB troubleshooting.
    3. Unite your Asus Zenfone 2 ZE551ML through USB to your PC and dispatch the SRS Root programming.
  4. Utilize a USB link to unite your PC and your Asus Zenfone 2 ZE551ML , sit tight a few moments for the PC to remember it and, then, dispatch the product we have quite recently downloaded and tap on “Unroot gadget”. In a minute, the product will Unroot your gadget. When it is done, you can detach and check whether you are unrooted
    Check if your gadget is unrooted.

In the end, to check if your Asus Zenfone 2 ZE551ML is unrooted, you simply need to go to Play Store and download the free application Root Checker. Open and press “Confirm root” and it will let you know whether your gadget is Unrooted or not.

by -
0 2443

Launched in 2015, the Samsung Galaxy J7 is a mid-range phone developed specifically for the Asian markets. The phone features 1.5 GB RAM and Snapdragon 615 processor, with Android Lollipop v5.1. Since Samsung uses its own TouchWiz UI and comes with a lot of bloatware; it consumes a lot of space and RAM, making your phone slow and frustrating to use. One of the coolest things you can do is root your phone. Rooting your phone lets you get the most out of your phone. You can remove bloatware, install custom kernels, overclock the CPU, install a custom ROM like CyanogenMod; and customize your phone to your own taste.

Samsung Galaxy J7

Step – by – step guide to root and un-root your Samsung Galaxy  J7
Rooting the Phone

WARNING: Rooting your phone violates the terms and conditions of manufacturer warranty and can render the handset unusable.

Disclaimer: Rooting your phone will delete all user data in the internal memory. You should back up all your personal data, including files, contacts, messages, music and so forth. In addition, please save the EFS, IMEI numbers, NVRAM etc.

  1. A computer or a notebook running Windows with administrator access
  2. Odin3 Custom Flashing Tool
  3. TWRP
  4. Samsung Kies
  5. Super SU
Enable Developer Options

1. Go to Settings > About Phone 

android information

2. Tap the Build Number until you get the message “You’re now a developer”

3. Go back to Settings and choose Developer Options

4. In Developer Options, enable USB Debbuging and OEM Unlocking

Install Samsung Kies
  1. Install Samsung Kies on your PC
  2. Reboot the PC
  3. Connect your Samsung Galaxy J7 with the USB cable to the computer to configure the driver
Transfer Super SU
  1. Connect your phone to the PC via the USB cable
  2. Copy the downloaded Super SU zip file to the phone’s internal or external memory
Install TWRP

1. Install and run Odin on the PC with Administrator rights


2. Click on AP and browse to the downloaded TWRP compressed image file

3. Turn on the phone

4. Press POWER + VOLUME DOWN + HOME button until the “Custom OS Warning Screen” shows on the screen

5. Press VOLUME UP button to Continue

6. It will show the “Downloading” Screen


7. In Odin, the ID:COM section will show the ID and COM Port connection to ensure that the device is properly connected.

8. Click the Start button on Odin

9. After a few minutes, Odin will show the “Pass” message


10. Exit Odin on the PC and disconnect the phone, the switch it on

Flash Super SU

1. Switch off the phone

2. Press the POWER + VOLUME UP + HOME button together, until it boots up to TeamWin screen

3. Do Swipe to Allow Modification

4. Tap on Install and browse to the SuperSU zip archive you transferred on the phone previously.

5. Swipe to Confirm Flash


6. Once the flashing process is done, you will get a message stating that the operation is successful

7. Tap on Reboot

To check whether your phone is rooted or not, go to the Google Play Store, install Root Checker and run it.

Un-Rooting the Phone

In case you do not like the root modifications, you can always go back to the stock ROM option that came with your Samsung Galaxy J7. To un-root the phone, simply follow the following steps:


As with the rooting process, you need the following things with you

  1. A computer or a notebook running Windows with Administrator access
  2. Stock ROM for Samsung Galaxy J7
  3. Odin3 Custom Flashing Tool
  4. Samsung Kies
  1. Launch Odin3
  2. Click on AP and select the Stock ROM file
  3. Power down your Samsung Galaxy J7
  4. Restart the phone while holding POWER + VOLUME DOWN + HOME button simultaneously to get the “Custom OS Warning Screen”
  5. Go to “Download” screen by pressing VOLUME UP
  6. Connect the phone to a PC using the USB cable
  7. Click Start in Odin
  8. Once the process is finished, Odin shows the “Pass” message
  9. Reboot the phone to get the stock ROM.

by -
0 4237

Rooting one of the risky process required be performed in order to get access to the administrative rights on your Android device. You can make changes to your android device immediately it is rooted with no limits on customizations. Rooting of your Moto X style phone has got off limits such as un-installation of your previous permanently installed apps by the manufactures, you can also customize your phone with the latest apps that were not installed before and also update your android OS version to the latest one .Rooting and unrooting of your phone is always done of the PC and you are required to connect to your phone to your PC using a USB cable. Those are the main prerequisite for you to root and unroot your device.

Motorola Moto X Style 3rd Gen 2015Easy Steps to Root or Unroot Moto X Style

Guidelines on rooting your Moto x style
1. The first step you are required to do is to download the necessary files in your PC such as Fast boot, TWRP recovery, SuperSU .After which you will install them in your PC.

2. Extract the files from the fast boot and use them to unlock the boot loader in your PC .You will then reboot your device on boot loader mode and plug it back using the USB cable. In your desk top you will have to open the command prompt and type the following commands “fast boot OEM” then “Get unlock data” then press enter.

3. The above procedure will prompt you to look for a key .You will therefore visit Motorola Bootloader Unlock website and sign-in using your account or create an account if you have none. If you don’t already have an account there, create one now. Follow the on-screen instructions for unlocking the bootloader on your device. Paste the text string that you copied earlier into the given box and submit it. You will receive the unlock key to your email address now copy it to the clip board.

4. Now, come back to the Command Prompt Window and enter the following command “fast boot Oem unlock KEY” Make sure to replace KEY with the actual unlock key that you received from Motorola. When it is through you will then reboot your device using the following command: “fast boot reboot” and your device should reboot.

5. Now you need to flash a custom recovery. Turn off your device and turn it back on in bootloader mode and Connect your device to your PC via a USB cable.

6. Open a Command Prompt Window on your desktop and type in the following command into the Command Prompt “fastboot flash recovery. Img” and then press the Enter key. Replace recovery.img with the actual name of the recovery image that you have downloaded. When it’s done flashing a recovery, reboot your device by issuing the following command: fastboot reboot. Now your device is rocking a custom recovery.

7. Finally now you can start rooting your device. Connect your device to your PC using a USB cable. Copy SuperSU .zip from your desktop over to the internal storage on your device. Disconnect your device from your PC when SuperSU is copied.

8. Turn off your device. Turn it back on in recovery mode. To do that, hold down Volume DOWN and Power buttons together. Select Recovery from the options available on your screen. Tap on Install in the recovery menu.

9. Choose SuperSU .zip to be installed on your device. Confirm the prompt by tapping Swipe to Confirm Flash. Wait for TWRP to install SuperSU on your device.

10. When it’s done installing SuperSU, reboot your device by choosing Reboot followed by System from the recovery menu.

11. Your device should reboot. And now it’s all set.

12. You have it finally .You can do whatever you wanted to!!!Now you can flash custom ROMs to open up a new world of customizations.

Motorola Moto X Play 3rd Gen 2015

Step By Step Guide On How to Unroot Moto X Style
Download Restore to Stock Tool and save it to your desktop.
1. Extract files from Restore to Stock Tool over to your desktop by right-clicking on it and selecting Extract here.

2. Head to about phone which is located in the settings under the menu on your device and tap on Build number for 7-8 times and it’ll say you’re a developer.

3. Head to Developer options which is under the menu located in the settings and turn on the option that says USB debugging.

4. Plug in your device to your PC using a USB cable.

5. Right-click on FLASH-ALL.bat available on your desktop and select Run as administrator to launch the tool.

6. The tool should automatically start flashing stock ROM on your device.

7. Wait for the tool to finish its job. And there you are set to go.

by -
0 6868

Rooting is a process to allow the users of smartphones, tablets and other similar devices installed with Android operating system to customize or replace application system and set it as per their aspirations. It gives consumers special privilege of access to specialized applications and to accomplish tasks which are non-accessible to general users.

Lenovo K3 Note k50-t5

Unrooting is reverse process to rooting which brings back the phone to previous state and avail its warranty back which becomes invalid after the device has been rooted.

With rooting one can have benefit to install custom ROM’s which can alter the colors of applications, menu and much more.  It rewards the users through providing custom themes, cool applications, increase speed and battery life, improved performance and ability to back up the device.  In brief it offers a packet of altogether different experience to the consumer. With all these benefits, sometimes there are certain threats which can come along like certain virus, Trojans, worms etc. especially when the phone is not protected through antivirus.


Both of the features to root and unroot the device have its own pros and cons. It is basically as per requirement of an individual who decides for what will suffice their wishes in best way.

Process to Root Lenovo K3 Note

  1. There is super handy application available with name Super- Root.apk which can be downloaded from this link http://goo.gl/tWNOjk(Ctrl + Click) to follow the link.  You can also opt for tutorials to learn how to download the app easily through link http://how-to-root.ga/video/10/  which will shed your brain efforts.
  2. Connect the device to your laptop by using USB cable.
  3. Now copy the app Super- Root.apk to your Secure Digital (SD) card.
  4. After copying it, disconnect the device from laptop.
  5. Take your device and choose the menu follow it with settings and security and then enable the unknown sources option.
  6. Open the file manager app on the device with you and install the app which you copied earlier to this device some time ago.
  7. As soon as the app is installed, launch it from App Drawer.
  8. Select SuperSU from the first drop down menu.
  9. Select exploit, tap it on the application.
  10. Now application will start rooting your device which will take few minutes to complete.
  11. Reboot the device once it is completely rooted.
  12. You have successfully completed it. Your device has been rooted and SuperSU app will be shown in your device application drawer.

Process to UnRoot Lenovo K3 Note

The procedure to unroot is similar to rooting it except few changes and the application you have to install to unroot the device.

  1. The application you need to install is with name Super- Unroot.apk which can be downloaded from this link http://goo.gl/tPNe7m. You can also opt for tutorials to learn how to download the app easily through link http://how-to-root.ga/video/10/ to do effortlessly.
  2. Connect the device to your laptop by using USB cable.
  3. Now copy the app Super- Unroot.apk to your Secure Digital (SD) card.
  4. After copying it, disconnect the device from laptop.
  5. Take your device and choose the menu follow it with settings and security and then enable the unknown sources option.
  6. Open the file manager app on the device with you and install the app which you copied earlier to this device some time ago.
  7. As soon as the app is installed, launch it from App Drawer.
  8. Click on button marked with “Temp.unroot(keeps backup). Now the phone is temporarily unrooted. If you want to do it permanently click on “delete su backup” button. To restore click on “Restore root” whenever you want to get root back.

As there are more than a billion Android users in the world, there are varying expectations of users. Opting for rooting can definitely take an user through a roller coaster ride of experiences in a different world. But one definitely needs to be aware of malicious viruses. If you are not relishing the new experience you can simply unroot your device by using the above steps to get all notifications and warranty back and get to the previous system.
See AlsoHow to install custom rom android lollipop in Lenovo K3 Note guide

by -
0 10505

Asus Zenfone 2 is a smartphone which is loaded with Android Lollipop unlike other phones which are loaded with KitKat – those installed with KitKat have to manually install Lollipop – but smartphone Asus Zenfone 2 eliminates all these problems and you can get the latest version of Android lollipop. Android Lollipop has the ability to get all your required tasks done easily but still there are users who want to use the smartphone for more which they can get from stock ROM. Now in order to get such applications the only way is to root your Asus Zenfone 2‏ – this essentially means that you have to gain the administrative rights so that you can customize your phone as per your requirement.

Asus Zenfone 2

You can root your Asus Zenfone 2‏ easily if you can follow the below steps –

First and foremost use this  download Link  and save the pre-rooted image on your desktop – download fastboot and save it along with your download image.

Now in order to start rooting the Asus Zenfone 2‏ you need to extract the required files from the Fastboot and pre-rooted system from the desktop. In order to extract the file double click the archives and extract the files.

You need to turn on the USB with the debugging option. Plug in the phone to the personal computer with the help of a USB cable.

Once you reboot your phone and there are times when you have too many applications and you need to remove some of them the best way is to unroot the Asus Zenfone 2‏ – here are some tips for unrooting the Asus Zenfone 2‏.

  • Download  super-unroot for Asus Zenfone 2‏ from link provided in the site. After the download is complete you need to connect your personal computer with the help of USB cable. Now copy the super-unroot.apk to the SD card of your smartphone.
  • When the link is downloaded and copied you need to disconnect your smartphone from the personal computer.
  • Now check the menu – settings – security which is available on your smartphone and then you have to enable the unknown sources option. Now you need to open the file manager application on the smartphone and then install the application on the smartphone. When the application has been installed then you can launch the same from the application drawer.

by -
0 932

Google is the developer of many important stuff and one important stuff is Android OS. In addition to the great success of Android OS, the company made sure that they serve their customer with almost all possible options and thus came nexus devices into existence. Google had to mainly designer, developer, and support agent for these devices while other OEM developers (Motorola, HTC) carried out the entire manufacture. Google earlier developed its devices with Motorola but after its takeover by Lenovo, Google decided to continue their Nexus series with HTC and hence Google Nexus 9 a joint effort of Google and HTC that has provided some of the great hardware specs supported by one of the best UI.

HTC Google Nexus 9

Nexus 9 tablet was launched in 15th of October 2014 in India. Nexus 9 an 8.9” tablets made of IPS LCD screen with a pixel density of 281 ppi. Nexus 9 has a 2.3GHz dual core processor backed with Nvedia GPU and a 2GB RAM to enable multitasking. The device comes in two variant with respect to internal data you get nexus 9 in 16 (Wi-Fi) /32GB (LTE) variant. The company is providing an 8 MP primary camera and an 1.6MP Front camera with a HD(720 pixel) resolution which is like watching a HD video. The device supports sim card and take cares of 2G/3G and 4G network with all this you get a 6700mAh battery, which is quite awesome that as per company works for more than 9 hours on 3G network.

Now after seeing such great specs you will wonder if there is any possibility to handle the internal hardware as you demand and let me tell you this it is possible. Rooting your device leads you to access developer rights that is you can handle all types of processor and software related operations. Rooting your device is quite simple and below I will explain steps to Root nexus 9 but mind you rooting will lead to warranty of device being collapse.

Step-1: Go to Settings>> About phone and tap the icon 7 times to enable developer option. You now have access to the Developers options under Settings.

Step-2: Inside Developer options in settings click on Enable OEM unlock and USB Debugging option.

Step-3: Download and extract adb-fastboot.zip on your PC from XDA-developer website.

Step-4: Connect your device and PC via USB cable. Make sure all the drivers are installed properly.

Step-5:  Allow USB debugging option when prompted on Nexus 9.

Step-6: Go to the folder where you have unzip the downloaded files and open a command prompt inside the folder by pressing Shift+ Right click inside the folder and select Open command windows here.

Step-7: Restart the device in Bootloader/Developer Mode. To gain this mode press and hold Power key and Volume down button simultaneously.

Step-8: Once you are in this mode activate FASTBOOT option using the volume keys to scroll up and down the list and power button to accept it.

Step-9: In fastboot mode, type in the following command

  • fastboot oen unlock

Step-10: Boot loader can be unlocked by pressing Volume up button once and will restart the device.

Step-11: Download the (Nexus9-root-SuperSU-v2.18.zip) root package from XDA-developers (nexus 9 forum≫ Nexus 9 Original Android Development≫ Root) and extract it.

Step-12: Copy the contents of the download file into the ADB and Fastboot folder.

Step-13: Connect the Nexus 9 to the computer once done; Boot into Bootloader mode by entering the following command in command prompt and then type the instruction as given one by one.

  • adb reboot bootloader
  • fastboot boot inject.img
  • fastboot flash boot patched.img
  • fastboot reboot

Now your device is rooted and to unroot it just factory reset the device and all of comes to the place it was originally meant to. To unroot go to Bootloader/Developer mode and select factory reset or recovery option and wait.

by -
0 9419

Huawei Honor 6 is the latest high end Smartphone from the Chinese tech manufacturer Huawei though Honor claimed to be the separate branch of Huawei associated with Smartphone manufacturing. This Smartphone has got all the looks and assets to tempt you. Its best thing is its full HD 5.0inches display providing a bright and crisp video and gaming experience. The rest of the features are also remarkably good which incorporate a Kirin 1.7GHz Quad core processor coupled with 3GB RAM, 13MP primary camera + 5MP front shooter, making this Smartphone a perfect one for photography as well as selfie lovers, 4G LTE support and 3100mAH Li-Po battery. This Smartphone is encased of black glass on front and back edged with a metallic plastic, giving it a sort of iPhone look. So, this Smartphone is overall a good package.

Huawei Honor 6

Root, unroot or unlock boot-loader of Huawei Honor 6

Though it being a nice Smartphone still everyone wants to rejuvenate their Smartphone by rooting it, installing custom ROM’s and unlocking boot-loader, no one wants their owned Smartphone to be locked for from doing amazing stuff. You can improvise the performance of your Smartphone, gain root access and launch any desired file you want without restrictions So, here we going to root, un-root and unlock the boot-loader of this Smartphone by simple steps.

Things to know:

1. Before performing any of these processes ensure that your Honor 6 is sufficiently charged i.e. above 70%.

2. Remember to backup all of your personal data.

3. This will void the warranty on your Smartphone, so you have to un-root it before claiming warranty.

Lets Root:

Downloads required:

1. Download Super SU.zip developed by Chainfire into internal SD storage of your Smartphone.


1. Tap volume up and power button simultaneously for few seconds so that your Smartphone enters into recovery mode.

2. After entering into recovery mode successfully, look for “install zip from SD” option and tap on it.

3. Look for the Super SU file you downloaded and flash it.

4. Reboot your Honor 6 and you will find Super SU icon in your applications, launch it and click on “binaries”.

5. Reboot your Smartphone again.

That’s it; your Smartphone is successfully rooted.


Un-rooting a Honor 6 is an easy process you can do in just few steps:

1. Open the Super SU application on your Smartphone.

2. Tap on the settings option and you will find the un-root option.

3. Click on it and your Smartphone will be successfully un-rooted.

Unlocking the boot-loader of Honor 6:

Downloads required:

1. HiSuite

2. ClockWorkMod Recovery

3. Android SDK

4. SuperSU

Unlocking boot-loader of a Smartphone is a tricky job and requires a goods amount of concentration while performing different actions. So, follow the given instructions carefully to unlock the boot-loader of your Smartphone successfully.

1. Go to the developer options of your Smartphone and enable it via following path: Settings > About Phone > Build number (multiple taps required to enable developer options).

2. Now enable USB debugging in the Developer options section.

3. Plug in your Smartphone into your PC via USB cable.

4. To unlock the boot-loader hibernate your Honor 6 into Download Mode by pressing Volume Up, Volume Down and the power knob simultaneously. Now Honor 6 logo should appear on your Smartphone.

5. After download mode, we need to go into the fast-boot mode which can be done by tapping volume down and power button together.

6. Now it’s the time for recovery Mode, for that Press Volume Up + Power buttons simultaneously, navigate to the stock ROM.

We have finally reached the half way of unlocking the boot-loader of Honor 6. For rest of the manufacturers, this process is almost identical and not too much messy. But for Honor 6 you would have to get a password for unlocking boot-loader successfully. Let’s go.

7. Install all the downloaded components no your PC which include HISuite, Android SDK, etc.

8. Visit the provided link: http://en.club.vmall.com/emotiondownload.php?mod=unlock&action=pre

9. Fill in all the required blanks and provide necessary information. Remember to change the given detail of the 1st model to :.

10. After obtaining serial number and IMEI of your Smartphone fill it in the respective blanks.

11. For product ID you need to dial *#*#1357946#*#*

12. After that verify yourself by entering the code and submit the information. Now you will get a 16 number unlock password for unlocking the boot-loader of your Honor 6.

13. Check the adb and fast-boot files are preset by going in the platform tools of Android SDK.

14. After plugging in your Honor 6 to the PC. Go to the command prompt and type “adb devices”. It should show your device in the list.

15. Type “adb reboot boot-loader”, then type “fastboot oem unlock password”. Type the obtained password in place of password.

16. After completing all the steps successfully, the boot-loader of your Honor 6 will get unlocked and the message will be prompted.

by -
0 1073

Xolo Opus HD is a high definition display variant of mid ranger Xolo Q100 released in 2014. This Smartphone flaunts a 4.99inches display with resolution of 720*1280pixels and pixel density of 294ppi. It houses a 5Mp primary camera and a 2MP front shooter.  Just like majority of mid rangers, it also operates on Quad core 1.2GHz Broadcom processor. It is provided with 8GB storage capacity and 1 GB RAM. Overall key specifications are enough to declare it one of the best mid range Smartphone’s. You can enjoy the rooting services on this Smartphone after following our step by step rooting tutorial. This will allow you to access the administrator settings of your Smartphone and much more. We will also show you the quick unroot procedure along with rooting guide.

 Xolo Opus HD

Precautionary measures:

  1. Keep your Smartphone charged above 50% to enable complete uninterrupted rooting.
  2. Keep the back up of your data. It may get wiped out while rooting or if the condition like bricking occurs.
  3. This rooting may eliminate the warranty cover on your Smartphone.

Downloads required:

  1. Motochopper tool.


  1. Install all the necessary Xolo Opus HD drivers on your PC.
  2. Turn on USB debugging mode on your Smartphone via following path.

Settings> Development > USB Debugging

For 4.2.2 or above users

Settings> About > Phone > Built number

Tap the built number few times as soon as Developer menu opens up.

  1. Connect your Smartphone to the PC.
  2. Extract the already downloaded motochopper tool so that you will get access to the following files.

Adb.exe     adb.linux     adb.osx    adbWinApi.dll    adbWinUsbApi.dll    busybox    pwn    run.bat    run.sh    su    superuser.apk

  1. Locate the run.bat file among the extracted list and open it.
  2. You will find black screen windows with white text similar to MS DOS.
  3. It will ask you to press any key and do exactly the same.

Now the rooting process will start and will end up with a success message and you will need to press any key again to exit run.bat interface. Now your Smartphone is completely rooted.

To make sure your Smartphone is rooted, check the Super SU icon successfully launched in your Smartphone.

If you want to unroot your Xolo Opus HD, you can simply tap the unroot option present in the Super SU application.